热线电话
0531-69951198
网站开云app下载
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:开云app下载 - 新闻中心 - 企业动态气液增压泵不增压的原因以

气液增压泵不增压的原因以及解决方法

发布时间:2022-02-23 15:06:35   发布人:http://www.sdjingtuo.com
一般来说,气液增压缸出现无法正常增压的情况,不一定就意味着气液增压缸坏了。那么,什么原因会导致气液增压缸不增压,遇到这种情况,又该如何解决呢。
Generally speaking, the failure of gas-liquid booster cylinder to pressurize normally does not necessarily mean that the gas-liquid booster cylinder is broken. Then, what causes the non pressurization of the gas-liquid booster cylinder? In this case, how to solve it.
气液增压缸不增压的原因及对应解决方法:
Reasons for non pressurization of gas-liquid booster cylinder and corresponding solutions:
1、阀组未调式好。检查阀组是否未调式好,如是则重新调试阀组。
1. The valve block is not well adjusted. Check whether the valve group is not well adjusted. If so, re commission the valve group.
2、调压阀已损坏,导致气源不能进入。检查调压阀是否损坏,如是则需更换调压阀
2. The pressure regulating valve has been damaged, so that the air source cannot enter. If yes, check whether the pressure regulating valve is damaged
3、对于接有调压阀或缸体接头为调速接头的气液增压缸,调整接头已处于关阀状态。检查调整接头是否已处于关阀状态,如是则重新打开速调接头
3. For the gas-liquid booster cylinder connected with the pressure regulating valve or the cylinder body joint is the speed regulating joint, the regulating joint has been closed. Check whether the adjusting connector is closed. If so, reopen the quick adjusting connector
以上就是今天带给大家的知识,气液增压泵专注行业多年,为用户不断的提供有价值的内容,开云app下载内容请继续关注我们:http://www.sdjingtuo.com
The above is the knowledge brought to you today. The gas-liquid booster pump has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.sdjingtuo.com
新闻推荐:

13188935873