热线电话
0531-69951198
网站开云app下载
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:开云app下载 - 新闻中心 - 企业动态气液增压泵工作原理等内容

气液增压泵工作原理等内容多面了解

发布时间:2022-08-08 11:22:28   发布人:http://www.sdjingtuo.com
气液增压泵是以压缩空气为动力,基于面积差原理,使液压油或其它液体按固定增压比连续输出并作为高压动力源的泵类产品,是集动力源于一体的一种变量柱塞泵。为了更好的使用它,您需要掌握的信息开云app下载才是。
The gas-liquid booster pump is a kind of pump product, which is powered by compressed air and based on the principle of area difference to continuously output hydraulic oil or other liquids according to a fixed boosting ratio and serves as a high-pressure power source. It is a variable plunger pump integrating power source. In order to better use it, you need to master more information.
在压缩空气接通初期循环速度快,输出液体流量大。随着输出压力的逐渐提高,活塞承受的阻力也越来越大,泵的循环速度也越来越慢。当输出压力对活塞的反作用力与气体驱动力达到平衡时,泵将自动停止。
At the initial stage of the compressed air connection, the circulation speed is fast and the output liquid flow is large. With the gradual increase of the output pressure, the resistance of the piston becomes larger and larger, and the circulation speed of the pump becomes slower and slower. When the reaction force of the output pressure to the piston and the gas driving force reach balance, the pump will automatically stop.
这时泵处于保压状态而不消耗任何能量,因此它提供一种经济的动力源。当因泄露或其它原因引起输出压力下降或者提供的气源压力升高时泵会立即启动,给系统补压,这得益于泵自身较低的摩擦阻力,并保证输出压力的稳定性。
At this time, the pump is in a pressure maintaining state and does not consume any energy, so it provides an economic power source. When the output pressure drops or the supplied air supply pressure rises due to leakage or other reasons, the pump will start immediately to supplement the pressure to the system. This is due to the low friction resistance of the pump itself and ensures the stability of the output pressure.
双作用泵比单作用泵的脉动更小,输出脉动更小,输出流量比同系列的单作用泵提高50%。
The pulsation of the double acting pump is smaller than that of the single acting pump, the output pulsation is smaller, and the output flow is 50% higher than that of the single acting pump of the same series.
压力建立后,泵自动停止,没有噪音不,不消耗能源,更为环保。
After the pressure is established, the pump will stop automatically, no noise, no energy consumption, and more environmentally friendly.
没有工作介质温升现象,适合在夏季及闷热无通风场合使用。
There is no temperature rise of the working medium, and it is suitable for use in summer and hot and ventilated places.
气液增压泵
不需要电源,适合无电源或防爆场合。
No power supply required, suitable for non power or explosion-proof occasions.
体积小配置灵活,可自带油箱,也可远端供油,节省安装空间。输出压力可达上百兆帕,但不同输出压力产品之间的价格差异不大。
Small size and flexible configuration. It can bring its own oil tank or supply oil at the remote end to save installation space. The output pressure can reach hundreds of MPA, but the price difference between products with different output pressures is not large.
压力没有冲击,更安全,对设备和零件没有损伤。
The pressure has no impact, is safer, and has no damage to equipment and parts.
便于维护,泵体结构设计模块化,所有易损件均为标准件,方便安装及拆卸。气压驱动不需额外的在线润滑管路,既节约了运行成本又避免了油雾对环境的污染以及人体的伤害。
It is convenient for maintenance. The structure design of the pump body is modular. All vulnerable parts are standard parts, which is convenient for installation and disassembly. The pneumatic drive does not require additional on-line lubrication pipeline, which not only saves the operating cost but also avoids the pollution of oil mist to the environment and human body.
频繁的启动、停止对泵无任不良影晌。
Frequent start and stop have no adverse effect on the pump.
预留密封泄漏溢流孔,在保护泵体同时,亦可及时发现泵的故障。
Reserve seal leakage overflow hole to protect the pump body and find the pump fault in time.
采用换向阀外置,便于维修更换,并且寿命更长。
The directional valve is installed externally, which is convenient for maintenance and replacement and has a longer service life.
在泵的压力范围内,通过调节输入气压,输出液体压力即可得到相应调整。
Within the pressure range of the pump, the output liquid pressure can be adjusted accordingly by adjusting the input air pressure.
根据现场工况要求,从简单的手动操作到全自动控制。
From simple manual operation to full-automatic control according to the requirements of on-site working conditions.
增压介质多样,水、油、冷却液、润滑油以及有腐蚀性流体均可以使用。
The pressurizing medium is various, and water, oil, coolant, lubricating oil and corrosive fluid can be used.
气液增压泵工作原理等内容多面了解的相关就到这里了,如果您对该设备有兴趣了解或者有采购需求,就关注我们网站http://www.sdjingtuo.com,咨询开云app下载信息吧。
This is the end of the multi-faceted understanding of the working principle of the gas-liquid booster pump. If you are interested in learning about the equipment or have purchasing needs, please follow our website http://www.sdjingtuo.com Yes, please ask for more information.
新闻推荐:

13188935873