热线电话
0531-69951198
网站开云app下载
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.booklovinmamas.com

企业动态

当前位置:开云app下载 - 新闻中心 - 企业动态选择气动增压泵要从哪些方

选择气动增压泵要从哪些方面考虑?

发布时间:2023-06-19 16:15:30   发布人:http://www.booklovinmamas.com
气动增压泵是由二位四通先导阀来控制往复运动的柱塞泵。利用气体压力来传递能量,气动装置结构简单、轻便、安装维护简单,介质为空气,较之液压介质来说不易燃烧,故使用。选择气动增压泵要从多方面进行考虑,就能够保证这几项参数的标准达到给我们使用带来方便的情况,这样就从根本上保证了工作效率。选择气动增压泵要从以下多方面进行考虑:
The pneumatic Booster pump is a plunger pump controlled by a two position four-way pilot valve to reciprocate. Using gas pressure to transmit energy, the pneumatic device has a simple and lightweight structure, easy installation and maintenance, and the medium is air, which is less flammable compared to hydraulic medium. Therefore, it is used. The selection of pneumatic Booster pump should be considered from many aspects, which can ensure that the standards of these parameters meet the conditions that bring convenience to our use, thus fundamentally ensuring the working efficiency. The selection of pneumatic Booster pump shall be considered from the following aspects:
1.工作压力和流量
1. Working pressure and flow rate
工作压力参照驱动气压为0.48Mpa时泵输出压力和流量。如果泵的输出压力大于所需的工作压力,这就要考虑措施。
气体增压泵
The working pressure refers to the pump output pressure and flow rate when the driving air pressure is 0.48Mpa. If the output pressure of the pump is greater than the required working pressure, measures should be considered.
2.驱动气体的压力和流量
2. Pressure and flow rate of driving gas
在连续工作时使用的驱动气压不超过0.69Mpa,在间歇工作时可达到1.03Mpa。在很好性能状态时气动泵的耗气量,请参照所需驱动气体流量表。
The driving air pressure used during continuous operation does not exceed 0.69Mpa, and can reach 1.03Mpa during intermittent operation. Please refer to the required driving gas flow rate table for the air consumption of the pneumatic pump in good performance state.
3.输送液体介质
3. Conveying liquid medium
泵输送的液体介质是气动增压泵的选型中着重考虑的部分。液压部分的材质和液压密封圈是由输送的液体介质所决定的。泵可用油、水和大多数液体介质。标准泵的主要液压密封圈是丁橡胶和聚氨酯,单向阀座采用特氟龙密封。其它密封材料包括碳氟化合物和亚乙基丙烯,这些密封材料主要用于输送的特殊介质。请向工厂或当地的分销商咨询密封材料选型。
The liquid medium delivered by the pump is a key consideration in the selection of pneumatic Booster pump. The material and hydraulic sealing ring of the hydraulic part are determined by the liquid medium conveyed. Pumps can be used with oil, water, and most liquid media. The main hydraulic sealing rings of the standard pump are neoprene and polyurethane, and the one-way valve seat is sealed with Teflon. Other sealing materials include Fluorocarbon and ethylenepropylene, which are mainly used for conveying special media. Please consult the factory or local distributor for sealing material selection.
4.可接受的体积和重量对于某些的应用,气动增压泵和动力单元的外形尺寸和重量也要考虑。
4. Acceptable volume and weight For some applications, the overall dimensions and weight of pneumatic Booster pump and power unit should also be considered.
气动增压泵就能够保证这几项参数的标准达到给我们使用带来方便的情况,这样就从根本上保证了起动增压泵的工作效率。
The pneumatic Booster pump can ensure that the standards of these parameters meet the conditions that bring convenience to our use, thus fundamentally ensuring the working efficiency of starting the Booster pump.
新闻推荐:

13188935873