The driving part of Jingtuo's "Gas Booster Pump" is made of aluminum alloy and stainless steel, with partial oxidation treatment. The sealing ring is a high-quality product imported from Germany.
The directional valve is equipped with built-in pneumatic drive, which is easy to maintain without electricity.
The drive is pneumatic and does not require any power supply. It is suitable for explosion-proof workshops and various explosion-proof occasions. It is suitable for various factories and laboratories with a pressure of 3-8bar.
The driving of the gas booster pump is divided into a cylinder diameter of 160mm.125mm. 100mm. 80mm. The size of the booster cylinder of the booster pump is determined based on the boost ratio, and the area is proportional to the driving ratio. Because the size of the piston is a ratio of area, the driving intake pressure can be adjusted to adjust the gas pressurization pressure, and stepless pressure regulation can be carried out.
As the pressure of the pressurized gas increases, the reciprocating working speed of the pump will gradually slow down. After the pressure on both sides reaches equilibrium, it will stop working. Enter the pressure maintaining state. When the pressure of the pressurized gas decreases, according to the law of conservation of pressure, the gas booster pump starts working without pressure.
Jingtuo's "Gas Booster Pump" has small size, reasonable design, light weight, and is easy to carry. It can be installed in narrow machinery and various spaces, and can also be used separately.
This article is dedicated by Gas Booster Pump Network. For more information, please click on: http://www.booklovinmamas.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned