热线电话
0531-69951198
网站开云app下载
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

业内资讯

当前位置:开云app下载 - 新闻中心 - 业内资讯 气体自动增压泵的使用性

气体自动增压泵的使用性能介绍

发布时间:2023-03-15 14:06:25   发布人:http://www.sdjingtuo.com
多种气体驱动:压缩空气、液化氮气和管道氮气、水蒸气。
Multiple gas drives: compressed air, liquefied nitrogen and pipeline nitrogen, water vapor.
输出流量大:只需0.3-0.69MPa压缩空气驱动就可获得较大的输出流量。自动保压:工作时,迅速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力,此时消耗能量很小,无热 量产生,无零件运动。当压力平衡打破后,气动增压泵自动开始工作到下一个平衡。
Large output flow: only 0.3-0.69MPa compressed air drive can obtain large output flow. Automatic pressure maintaining: when working, the pump will work rapidly and reciprocally. When the output pressure is close to the set pressure value, the reciprocating speed of the pump will slow down until it stops. And maintain this pressure. At this time, the energy consumption is very small, there is no heat generation, and there is no movement of parts. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance.
材质优良:高压部分材质为不锈钢。高压柱塞材质为不锈钢,并采用双层密封。
Excellent material: the high-pressure part is made of stainless steel. The high pressure plunger is made of stainless steel and sealed with double layers.
维护简单:气动增压泵的零件及密封少,维护简单且成本低。相同系列泵的所有"O"型圈,维修包易损部件可相互替换,大大降低了维修成本。气动增压泵出厂前已加注润滑剂,工作时无需外部润滑。
Simple maintenance: pneumatic booster pump has few parts and seals, simple maintenance and low cost. All "O" rings and vulnerable parts of the same series of pumps can be replaced with each other, greatly reducing the maintenance cost. The pneumatic booster pump has been filled with lubricant before leaving the factory, and no external lubrication is required during operation.
气体增压泵
保持液压无须消耗能量2、 具有防爆功能,无需电力或电线连接3、 自身安全4、 结构小巧,重量轻,不受天气变化影响5、 易实现自动控制6、 抗污染7、输出静态压力由驱动气压来调节8、 输出压力达80000PSI的压力9、 在满负载时非常容易进行启动、停止操作10、 易安装,操作
Maintaining hydraulic pressure does not consume energy 2. It has explosion-proof function, and does not need electricity or wire connection 3. It is safe for itself 4. It is compact in structure, light in weight, and not affected by weather change 5. It is easy to realize automatic control 6. It is anti-pollution 7. The output static pressure is adjusted by the driving air pressure 8. The output pressure reaches 80000PSI pressure 9. It is very easy to start and stop operation at full load 10. It is easy to install and operate
气体增压泵是以压缩空气为动力源的一种活塞式增压泵,当进气时增压气控阀的阀芯往复切换工作,控制增压泵活塞以极快的速度作往复动作,随着输出压力的增高,活塞的往复速度减慢直至停止,此时,增压泵输出的压力恒定,能量消耗低,各部件停止工作;无论何种原因造成保压回路压力下降,增压泵将自动启动,补充泄露压力,保持回路压力恒定。泵体全部采用铝合金及不锈钢制造,密封件均为进口品,驱动气压为8bar。
The gas booster pump is a piston booster pump with compressed air as the power source. When the air is fed, the valve core of the booster gas control valve switches back and forth to control the piston of the booster pump to reciprocate at a very fast speed. With the increase of the output pressure, the reciprocating speed of the piston slows down until it stops. At this time, the output pressure of the booster pump is constant, the energy consumption is low, and all parts stop working; No matter what causes the pressure drop in the pressure maintaining circuit, the booster pump will automatically start to supplement the leakage pressure and keep the circuit pressure constant. The pump body is made of aluminum alloy and stainless steel, the seals are imported, and the driving pressure is 8 bar.
有了气体增压泵上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的网站:http://www.sdjingtuo.com或者来电咨询,我们会尽全力为您
With the summary above, I hope it can help our customers. If you have any questions or need help, please click our website: http://www.sdjingtuo.com Or call to inquire, we will do our best for you
新闻推荐:

13188935873