热线电话
0531-69951198
网站开云app下载
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.booklovinmamas.com

业内资讯

当前位置:开云app下载 - 新闻中心 - 业内资讯气动增压泵在生产制作中应

气动增压泵在生产制作中应该注意什么?

发布时间:2023-06-23 23:40:05   发布人:http://www.booklovinmamas.com
1.正确选型:
1. Correct selection:
气体增压泵分为气体增压泵和气液增压泵两种,气体增压泵可以对空气、氮气、氧气、氢气等气体增压,如果为腐蚀性气体,如H2S,SO2等气体,在选型时客户应主动说明。气液增压泵适用于水、液压油等液体增压,如腐蚀液体也需要特殊说明。正确选型是气动增压泵稳定运行的前 提。
The gas Booster pump is divided into gas Booster pump and gas-liquid Booster pump. The gas Booster pump can pressurize air, nitrogen, oxygen, hydrogen and other gases. If it is corrosive gas, such as H2S, SO2 and other gases, the customer should take the initiative to explain when selecting the model. The gas-liquid Booster pump is suitable for boosting water, hydraulic oil and other liquids, and special instructions are also required for corrosive liquids. Correct selection is the premise of stable operation of pneumatic Booster pump.
气体增压泵
2.过滤要求:
2. Filtering requirements:
气动增压泵动力源为压缩空气,要求气源洁净,颗粒要求在5um以下,一般工厂气源比较脏,如果不经过滤直接接到泵上,长期使用,泵会长期积污,会导致单向阀失灵、密封圈磨损严重。
The power source of the pneumatic Booster pump is compressed air. The air source is required to be clean, and the particles are required to be less than 5um. Generally, the air source of the factory is dirty. If it is directly connected to the pump without filtering, the pump will accumulate dirt for a long time, which will lead to the failure of the one-way valve and serious wear of the seal ring.
3.安装要求:
3. Installation requirements:
安装时驱动气源好使用PU风管,原因容易安装,操作方便,管内不会生锈,如果使用金属管,安装前好用压缩空气吹扫,避免焊渣 吹到换向阀内,将换向阀卡死。气动增压泵可以垂直安装或水平安装,在条件允许的情况下,好垂直安装,垂直安装能延长密封件的使用寿命。
When installing, it is easy to use PU air ducts to drive the air source, which are easy to install and easy to operate. The pipes will not rust inside. If using metal pipes, it is recommended to use compressed air before installation to prevent welding slag from blowing into the directional valve and jamming it. Pneumatic Booster pump can be installed vertically or horizontally. If conditions permit, it is better to install vertically. Vertical installation can extend the service life of seals.
新闻推荐:

13188935873